Canon digitální videokamera XA40 Příručka

PDF Příručky
138 Stránky Anglicky

Canon digitální videokamera XA40
Focus Adjustment
60
Autofocus
When autofocus is activated, the camcorder continuously adjusts the focus on the subject in the
center of the screen. The focusing range is 1 cm (at full wide-angle, measured from the front of the
lens barrel) to G and 60 cm (throughout the zoom range, measured from the front of the lens barrel)
to G. Perform the following procedure to set the autofocus speed.
1 During manual focus: Press the AF/MF button.
2Select [AF Mode].
> [v " Camera Setup] > [AF Mode]
3 Select the desired option and then select [X].
Options
NOTES
The AF mode cannot be selected in the following cases.
- When > [v Camera Setup] > [Conversion Lens] is set to an option other than
[j Off].
- When infrared recording is activated.
While using autofocus, you can turn the focus/zoom ring to focus manually. When you stop turning
the ring, the camcorder returns to autofocus. This is useful in situations such as when focusing on a
subject on the other side of a window.
When the shooting mode is set to [T Fireworks], the focus will be set to G and cannot be
changed.
Autofocus takes longer to focus when the frame rate is 25.00P than when it is 50.00P.
Operating modes:
[= Instant AF]: Sets the autofocus to Instant AF. The focus is adjusted at the highest speed. This
mode is useful even when recording in very bright or low-light surroundings. This
mode uses both the TTL system and external sensor for focusing.
[? Medium AF]: Sets the autofocus to Medium AF. The camcorder focuses more smoothly on the
subject than when using the [= Instant AF] setting. This mode uses both the
TTL system and external sensor for focusing.
[@ Normal AF]: Sets the autofocus to Normal AF. The autofocus adjustment is made at a stable
speed.
Obsah
Rozbalit Vše
Související Příručky pro Canon digitální videokamera XA40